Checklist for Access Equipment in Cargo Handling Operations
Definition of cargo handling and legal requirements for access equipment on trucks, including verification procedures before loading and unloading.
Definition and Characteristics of Cargo Handling Operations
Cargo handling operations refer to the collective activities of loading and unloading trucks, as well as the entry and exit of goods in warehouses. A key characteristic of cargo handling in road freight transport is that it often takes place at locations such as shippers' or consignees' facilities, where direct control by the transport company is difficult. According to the Ministry of Health, Labour and Welfare, approximately 70% of occupational accidents in the road freight transport industry occur during cargo handling operations. There is a strong demand for ensuring safety in these external sites that are difficult to manage.
Obligation and Scope of Access Equipment
The Ordinance on Industrial Safety and Health stipulates that trucks with a maximum load capacity of 2 tons or more must be equipped with access equipment for the cargo bed. This equipment is required for both "access between the ground and the cargo bed" and "access between the ground and the top of the cargo." Portable items, such as steps, and vehicle-mounted steps are also included in the scope. Furthermore, if the lifting plate of a tailgate lifter is stopped midway to be used as a step, it is also considered access equipment.
Recommended Conditions for Access Equipment
To ensure safe access, the following recommended conditions are verified: the step height from the ground to the tread surface must be within 50 cm, and the tread width must allow both feet to be placed. The tread surface must have anti-slip treatment. If the tread is rod-shaped, a grip that allows for three-point support when climbing up and down is required. In the case of vehicle-mounted types, it is recommended that they are installed in at least one location, protruding from the side of the vehicle body.
Verification Procedures Before Loading and Unloading
Before starting work, please check the following items in order. First, confirm if the vehicle has a maximum load capacity of 2 tons or more and inspect the presence of access equipment. Next, visually check if the step height is within 50 cm and if anti-slip treatment is present. If the tread shape is rod-shaped, confirm if a grip for three-point support is provided. Finally, check if at least one step is installed where more than half the length of the sole of the foot is visible from the cargo bed.
Practical Verification Example
For example, when unloading a truck with a maximum load capacity of 3 tons, the worker checks the step before climbing onto the cargo bed. The height from the ground to the first tread surface is measured with a tape measure, confirming it is within 50 cm. Additionally, it is checked whether there is anti-slip treatment on the tread and, if it is rod-shaped, whether the grip supports three-point support, before starting the work.
Sources
- 厚生労働省 職場のあんぜんサイト anzeninfo.mhlw.go.jp
- 厚生労働省 職場のあんぜんサイト anzeninfo.mhlw.go.jp
This content reflects the publication date. Laws and rules change — always check the official source.


